Home └MET101: MetroNet Residential Installation Training └Internet, TV, and Phone Installation

MET101: MetroNet Residential Installation Training

0 %

Completed

Course content

Internet, TV, and Phone Installation

10 XP
Prev Next
Fullscreen Share
Rating
0 0

There are no comments for now.

Join this Course
to be the first to leave a comment.

1. What is the MetroNet standard light level spec range for 1490 nm?
−14 to −23 dBm. −10 to −27.99 dBm. −30 to −60 dBm. 1310 to 1550 nm.
2. What is the continuous ping test command a technician will use on the command prompt to verify connectivity?
ping metronet.com ping 8.8.8.8 –t netstat -a tracert https://www.google.com/search?q=google.com
3. When setting up an Eero router, what color should the light on the front be flashing to indicate it is ready to be programmed?
Solid white. Red. Flashing blue. Flashing green.
4. What is the recommended signal strength range, in dBm, when using the inSSIDer Wi-Fi Analyzer?
−71 dBm (weak signal) to −30 dBm. −60 dBm to −40 dBm. 10 dBm to 50 dBm. −10 dBm to −27.99 dBm.
5. What is the purpose of the VEN (Video Bridge Solution) in an IPTV installation?
To record and store programs. To act as an unmanaged splitter. To wirelessly pair each of the set top boxes into the TV network. To provide the main internet connection.
6. What must the switch on the back of the VEN be set to for the STBs to pair wirelessly?
"CL" "DVR" "STB" "AP"
7. What is the maximum number of wireless set top boxes (STBs) that can be installed per VEN?
Six (6) Five (5) Four (4) Three (3)
8. What must a technician verify before beginning the backfeed porting process for a phone line?
The alarm system is in test mode. That the customer's phone service with their existing provider works. That the blue pair of wires is available. That a cordless phone base is plugged into the ONT.
9. If a customer has an alarm system, what should the alarm system be to obtain "line seizure" correctly?
The last line in the system. Connected to a Cat6 line. The first line in the system. Rewired by the Metronet technician.