Home └MET101: MetroNet Residential Installation Training └House Entry, House Box, and ONT Installation

MET101: MetroNet Residential Installation Training

0 %

Completed

Course content

House Entry, House Box, and ONT Installation

10 XP
Prev Next
Fullscreen Share
Rating
0 0

There are no comments for now.

Join this Course
to be the first to leave a comment.

1. When installing a house box, what is the minimum distance it should be from an electrical meter?
6 inches. One foot. 18 inches. 40 inches.
2. When drilling the entry hole from the outside, at what angle must the hole be drilled, and why?
Straight down, for the cleanest path. Straight up, for easy wire pulling. At a slight angle up, to prevent water damage from the outside environment. At a slight angle down, for gravity-assisted drilling.
3. What must be included in the house box for future easy location of the drop?
A sticker with the GPS coordinates. The tracer wire, stripped and coiled to sit outside of the box. A small magnet. A pigtail.
4. When installing an ONT Wall Mounted Bracket, which type (GPON or XGS) has a pigtail that needs to be removed before installation?
XGS bracket. GPON bracket. Both brackets. Neither bracket.
5. When installing a wall plate, what fiber component must always be used?
A pre-made fiber jumper. A small loop of indoor fiber. The bulkhead. A strain relief clip.