Home └CHA200: Charter Installation Standards └'One Check' Process for FTTP with VIAVI

CHA200: Charter Installation Standards

0 %

Completed

Course content

'One Check' Process for FTTP with VIAVI

10 XP
Prev Next
Fullscreen Share
Rating
0 0

There are no comments for now.

1. What is the first step in the EPON Certification Process?
Launch the EPON Test v1 template Go to the Home Screen and press the Job Manager icon Enter the Work Order Number Open the OneCheck Fiber test
2. After pressing the “New” button in the Job Manager, what two options appear?
“From Template” and “From Previous Job” “From Template” and “New Work Order” “From Template” and “From Scratch” “From Previous Job” and “New Work Order”
3. What is the name of the template used for the EPON test?
EPON Certification v1 EPON Test v1 EPON Launch v1 EPON OneCheck v1
4. How do you input the Work Order Number?
Using a connected keyboard By scanning a barcode Using the virtual keyboard It's automatically populated
5. How is the active Work Order identified in the Job Manager window?
It's highlighted in blue It's located at the bottom of the list It's identified as “Active” and is at the top of the job list It has a green checkmark next to it
6. What is the purpose of pressing the active job in the Job Manager window?
To delete the job To load the tests that need to be performed To change the work order number To view the completed tests
7. When the Job window opens, what information does it show?
The required tests and their status The customer’s name and address The total time spent on the job The technician's assigned ID
8. What should be done before pressing "Continue" on the "Confirm you are ready" pop-up window for the OneCheck Fiber test?
The ONX should be connected to the internet An MP-60 should be connected to the ONX and to measure power The technician should be at the customer's home The Work Order Number should be confirmed
9. What does a green checkmark next to a test result signify?
The test is pending The test has failed The test has passed The test has been saved
10. After the OneCheck Fiber test completes, what button should be pressed to save the results?
"Finish Test" "Save Report" "Save and Continue" "Launch Test"
11. After saving the OneCheck Fiber test report, where are you returned?
The Job Manager window The home screen The active job The OneCheck Fiber app
12. What is the status of a completed OneCheck Fiber test updated to in the Job window?
Pending Pass Active Complete
13. What is the final step in the OneCheck Fiber test process before moving to the Ethernet test?
Highlighting the OneCheck Ethernet test Repeating the saving steps for all OneCheck Fiber tests Syncing the results Confirming the test is in a "Pass" status
14. What type of test does the OneCheck Ethernet app run?
An optical power measurement test A cable integrity test A speed test A signal-to-noise ratio test
15. What is the last step in the entire process after all required tests are complete?
Pressing “Save Results” for the final test Highlighting the next test Returning to the home screen, choosing the StrataSync application, and syncing the results Deleting the Work Order